In This Article
show
Best Selling Products In India
Get exclusive online shopping deals and offers on Best of the Best
Shop at 53% OFF PriceProduct RANK NO. 1
AMPEREUS 250 Volts Float Switch Sensor for Water Level Controller with 3 Meter Wire: Select NO/NC 3 Meters Cable Length(1 PC PACK)*
Product Highlights and Updates
- Floaty Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System
- Rated voltage: 250V & Rated current: 8A/Contacts: NO+NC & Weight
- Cable: 3 Meter (i.e. customize wire lenght is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices & Use: Water Level, liquid level Controller etc,
- INSTRUCTIONS, for INSTALLATION Insert the cable in the counter weight (yellow color part), from the conical part and rotate it. Thus causing the plastic ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure
- MADE IN INDIA PRODUCT
Shop at 51% OFF PriceProduct RANK NO. 2
OCEAN STAR TECHNOLOGIES Water Float Switch Sensor for Water Level Controller with 3 Meter Wire*
Product Highlights and Updates
- Endurance: ≥500,000 times & High quality of wire and Plastic Body Electrical
- Cheryy float switch for Water tank, Water Cooler, hard water or fuel such as diesel, kerosene, oil and other heavy water storage container for on/off switch.
- It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
- Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
- Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.
Shop at 30% OFF PriceProduct RANK NO. 3
MEGAFLOW 220/230/250 Volts IP 67 Float Switch Sensor for Water Level Controller with 3 Meter Wire (625 Gm)*
Product Highlights and Updates
- MEGAFLOW Float Switch Sensor/Water Level Controls Tank Overflow, Controls Sensor Automatic Water Motor Off when Tank Full; MEGAFLOW Float Switch Sensor controls Automatic pressure pump and Sump/open well Pump off when tank empty at a level to protect pressure pump, Sump/open well Pump as a Dry Running Preventer for safety from motor damage
- Rated Voltage:- 220-240V; Frequecy:- 50/60Htz; Rated Current:- 10A; Contacts:- NO+NC; Weight:- 625 Gm; Maximum Working Temperature:-60 c; IP Rating:- IP67;
- INSTRUCTIONS FOR INSTALLATION Insert the cable in the counter weight (Black color part), from the conical part and rotate it. Thus causing the given ring inserted in the opening to become detached (if necessary this operation can be facilitated with the use of a screwdriver). The ring should then be positioned in the point where it is desired to block the counterweight. Force the counterweight on the ring by rotating it using a slight pressure
- INSTRUCTIONS FOR INSTALLATION / CONNECTION is given in detail in manual ( Depicted in pictures of products also ) Available in 2 Meters/ 3Meters/ 5Meters wire length and also pack of 1, 2, 4, 8, 12 and 20 Pcs
- Purification Method: Reverse Osmosis
Shop at 36% OFF PriceProduct RANK NO. 4
OCEAN STAR PACK OF 2 FLOAT SWITCH (FLOATY) 3 MTR WIRE*
Product Highlights and Updates
Ocean Star Pack of 2
Floaty Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System
It is a nice product
Shop at 67% OFF PriceProduct RANK NO. 5
250 Volts Float Switch Sensor for Water Level Controller with 2,3,5,10 Meter Wire: Select NO/NC (2 Meter Wire)*
Product Highlights and Updates
- Floaty Water Level Controller WLC Square Head Float Switch Wired Sensor Security System Wired Sensor Security System
- Rated voltage: AC 125/ 250V & Rated MAX current: 16(4)A/Contacts: NO+NC & Weight
- Cable: 2,3,4,5 Meter (i.e. customize wire length is available)/ A float switch is a device used to detect the level of liquid within a tank.
- Use: Water Level, liquid level Controller etc,
- The switch may be used in a pump, an indicator, an alarm, or other devices
Shop at 62% OFF PriceProduct RANK NO. 6
Blackt Electrotech: 230 Volts Float Switch Sensor for Water Level Controller with 2 Meter Wire: Select NO/NC*
Product Highlights and Updates
- Rated voltage: 250V & Rated current: 8A/Contacts: NO+NC & Weight: 635 Gm,
- Cable: 2 Meter (i.e. customize wire lenght is available)/ A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices & Use: Water Level, liquid level Controller etc,
- Endurance: ‰¥500,000 times & High quality of wire and Plastic Body Electrical,
Shop at 38% OFF PriceProduct RANK NO. 7
Ocean Star Cable Float Switch Sensor 3 MTR Wire for Water Level (Floaty) 1 PCS*
Product Highlights and Updates
- Rated voltage: 250V & Rated current: 8A
- Contacts: NO+NC & Weight: 550g
- Electrical endurance: ≥500,000 times, Mechanical endurance: ≥100,000 times
- Cable: 3 Meter & High quality of wire and Plastic Body
- Use: Water Level, liquid level Controller etc
Shop at 78% OFF PriceProduct RANK NO. 8
Ocean Star 220/250 Volts IP 68 Water Tank Float Switch Sensor for Water Level Controller with 3 Mtr Cable Wire Select NO/NC Pack of (1)*
Product Highlights and Updates
- Degree of tightness: IP-68
- Maximum temperature: 60º C
- Rated Voltage:- 220-250V; Frequecy:- 50/60Htz; Rated Current:- 10A; Contacts:- NO+NC; Weight:- 625 Gm; Maximum Working Temperature:-60 c; IP Rating:- IP68
- Installation: Set the counterweight on the power cable to control the level. Connect the electric cable to the electric pump and then fix it inside the water tank. The length of the cable between the point of attachment of the article and the body of the article determines the water level. The power cord terminal should never be inserted into water during installation.
- Instructions for use for the filling operation. Connect the blue control cable to the electric pump and the black wire to the neutral wire as shown in the picture to fill it with water (the brown wire must be waterproof). The electric pump begins to fill with water and when the water in the tank reaches a level stops working.
- Instructions for use for the emptying operation. For the draining operation connect the brown cable to the water pump and the black cable to a neutral cable, as shown in the picture (the blue cable must be insulated). The electric pump stops when the water level reaches a level and if it exceeds this level it starts again to expel water.
- Installation: Set the counterweight on the power cable to control the level. Connect the electric cable to the electric pump and then fix it inside the water tank. The length of the cable between the point of attachment of the article and the body of the article determines the water level. The power cord terminal should never be inserted into water during installation.
- Instructions for use for the installation of the counterweight. Take off (peel) the plastic ring of the counterweight before installation and insert the cable through the ring, then insert the cable through the conical part into the counterweight and set it with a moderate pressure.
Shop at 49% OFF PriceProduct RANK NO. 9
POLO STAR Magnetic Float Sensor Switch For Liquid Water Level Controller | water Tank | Top Mount | Vertical Mount | 2 Meter Wire With Weight | With Reversable NO – NC (Pack of 2)*
Product Highlights and Updates
- Can be Used With hydroponics, Salt water Tank, Fresh water tank, Gardening, aquariums for power head control, Pet bowls, fish tanks, filtration, RO , Water Coolers, Water Filters ,Dosing pumps etc.
- Features : Float Can Be Reversed For NO / NC By Opening Bottom Lock as Per Your Requirement / Contact : NO / NC
- Stem Material : PP Corrosion Free , Technology : Magnetic Advance Technology , Wire Length : 2 Meter ,
- Ideal Operating Ratings : Voltage: 2 to 50V DC .Current: 1amp / Max Current : 1.2A (DC), Max Switch Watt : 10W
- Switch Configuration : SPST , Float Ball Material: PP With excellent Acid and alkali / alkaline resistance , WIRE : Premium Tin Coated 14/40 Single Core For High Performance
Shop at 56% OFF PriceProduct RANK NO. 10
IONIX float switch for water tank, auto cutoff switch for water tank, water tank auto cut off with switch, 230 volts float switch sensor for water level controller with 3 meter wire: Select no/nc*
Product Highlights and Updates
- Voltage: 250Vac Current: 15A Shape: Squarez
- Product Colour May Slightly Vary Due To Photographic Lighting Sources Or Your Monitor Settings
- Contacts: No+Nc
- Can be used to auto cut off Motor when tank is full , can be used in any liquid tanks
- Liquid Fluid Waterproof
Shop at 60% OFF PriceProduct RANK NO. 11
IONIX RO Filters Float Valve and Auto Cut Off Switch for RO Models with Front Water Tank, Grand Float switch, Auto cutoff switch, 1 Piece, White (Float set Dolphin RO type - Straight)*
Product Highlights and Updates
- Food grade float valve, ro water purifier float valve for all kind of ro available in market easy to install and replace and can be installed by yourself; Package contains - 1pc Dolphin type ro float valve
- Max Current : 16 A 125 - 250 V AC It is designed to be used with Models and many Water Purifiers..... Also Ideal Product for Lab Purpose/Research/Project
- Used for auto cut off function of RO to prevent overflow
- Package contains :- 1pc Dolphin type ro float valve
- Color Map: Blue; Purification Method: Reverse Osmosis; Included Components: Bag Filter 20 Inch , Spanner , Pressure Gauge , Antiscalant; Warranty Description: Transit Damage
Shop at 73% OFF PriceProduct RANK NO. 12
LEYDEN® Water Tank Use High Insulated Cable 3 Meter, NO/NC Contact Float Switch Sensor for All Type of AC/DC Controller, Pump and Water Tank Wired Sensor Security System 3 Meter Cable( Pack of 1 )*
Product Highlights and Updates
- High Quality Sealed
- 3 Meter Cable Length
- NO & NC Contact
- Easy To Use
- Smooth Operation
Shop at 50% OFF PriceProduct RANK NO. 13
Parijata liquid control float switch Water Tank Level Liquid Float Switch Level controller Float Switch, Float Level Controller for water tank, Float switch, Water purifier 220Volts AC*
Product Highlights and Updates
- Endurance: =500,000 times of wire and Plastic Body Electrical
- Rated voltage: 250 Volts and Rated current: 16A/Contacts: NO+NC. Also works on 24 Volts DC.
- Cable: 3 Meter / A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices and Use: Water Level, liquid level Controller
- Long life (approximate 10 million operations) & Rust proof (entire sensor body in polypropylene) High Quality Float switch with 3mtr ISI Cable. you can add extra cable as per need's.
- Easy to install in any tank just hang down and connect with on/off switch to cable, when tank full it go up (switch off) and when tank empty it's down (switch On).
- It's Corrosion Free, ISI cable, Sturdy and durable & need no maintenance, No current / voltage is passed through water, therefore no electrolysis or Salt deposition.
- 6 months warranty for manufacturing Defect (Repair or Replacement)